MEDIX-RC-AMICO RADIOLOGICAL DIAGNOSTIC DIGITAL COMPLEX FOR TWO WORKING PLACES

The Medix-RC-Amico Radiological Diagnostic Digital Complex for Two Working Places is intended for digital X-ray studies with the possibility of anteroposterior and oblique X-rays with the patients in the lying, standing, sitting, and lateral positions, as well as with the possibility of longitudinal linear tomography in the digital format.

Structural features of MEDIX-RC-AMICO complexes comply with all modern diagnostic radiology requirements, providing operating simplicity and convenience, reliability and safety, as well as the high quality of images obtained. The optional system allows selecting MEDIX-RC-AMICO corresponding to the needs and possibilities of a specific medical institution.

Delivery specification

— Tomographic film table

• Simple, reliable, and seasoned tomographic table construction allows performing X-ray studies with the possibility of obtaining direct and oblique X-ray films with the patient lying, standing, or in lateral positions, as well as performing linear tomography. The table is equipped with a stationary device for the digital transformation of X-rays, which is based on the flat panel (flat-panel digital detector) of the 43×43 cm format.

— Vertical film stand

• The stand is equipped with a stationary device for the digital transformation of X-rays, which is based on the flat panel (flat-panel digital detector) of the 43×43 cm format.

— Software-hardware complex:

• The complex is based on the UCOI-ACCORD device for digital processing, visualization, and backup of medical images — a modern PC with a specialized Accord-AMICO software system. The Accord-AMICO software system operates in the DICOM 3.0 international medical standard. It can be distinguished by the new, modern graphic user interface created according to the patient examination procedure to simplify the operations of the radiologist and the radiological lab technician.

— The software-hardware complex consists of the following:

— UCOI-ACCORD device for digital processing, visualization, and backup of medical images (Radiological lab technician AWP):

• PC-based control software set;
• LCD-monitor with a diagonal of at least 21.5 inches;
• specialized Accord-AMICO software for working with X-ray and fluoroscopic images.
• UCOI-ACCORD device for digital processing, visualization, and backup of medical images (Radiologist AWP):
• PC-based control software set;
• LCD-monitor with a diagonal of at least 21.5 inches;
• monochrome medical monitor with a diagonal of at least 21.5 inches (2 Mp);
• specialized Accord-AMICO software for working with X-ray and fluoroscopic images;
• printer for report printing on the A4 paper;
• specialized printer for X-ray image printing.

— TOP-X 850HF High-frequency X-ray power device

• Complexes are equipped with a TOP-X 850HF high-frequency power device (up to 65 kW). The set of 1500 automatic organ programs can accelerate the studies performed by physicians. Besides, personal programs with specific requirements of practical physicians can be created, and the manual exposure adjustment system is also installed. The software may be ordinarily changed per the radiologist’s requirements.
• Custom orders may presume the fitting out of the power device with a high-speed stator which will increase the rotation speed of the X-ray tube anode to 9000 rpm and increased tube loads (up to 2 times).

— Emitter with the X-ray tube

• MEDIX-RC-AMICO* complexes include an X-ray emitter with an in-built thermostatic element to prevent overheating, modern X-ray tubes that have an anode rotation speed of 3000 and 9000 rpm.

— Device for determining patient radiation doses

— A set of protective X-ray clothing (apron, neck shield, anterior shield, protective plate set)

* Optionally, the MEDIX-RC-AMICO complex may be equipped with a tomographic table with an adjustable deck height.